“DeckProof is a cold liquid applied, seamless, waterproofing system that cures within 20 minutes and can be trafficked within an hour.”
RAPID CURING WATERPROOFING
Ideal for domestic projects or small industrial roofing, the DeckProof Waterproofing system is a rapid cure 2 coat waterproofing membrane that provides a tough surface coupled with 200% elasticity. Provides a cured membrane with a similar finish to GRP or EPDM, but with greater flexibility and faster application.
ANTI-SKID FINISH AVAILABLE
DeckProof Anti-Skid is a one coat application, which is similar to DeckProof Waterproof, but comes with a ready mixed anti-skid component. With a curing speed of 20 minutes, areas coated can be reopened to general foot traffic within an hour.
CONTACT OUR TEAM FOR MORE INFORMATION ON +44 (0)8443 356 386
DeckProof provides a fully waterproof membrane once cured.
DeckProof also can provide and anti-skid finish.
DeckProof forms a completely seamless membrane.
DeckProof can be applied down to -30C, and in damp conditions with our primer range.
DeckProof can be applied to felt, concrete, metal, fibre cement, masonry, asphalt and timber.
Specifically formulated to fully bond with many surfaces.
For smaller roller applied projects, DeckProof is ideal for over coating many existing surfaces and can extend the life of your roof. DeckProof is also suitable for new roofing projects and can be applied directly to a timber deck. A variety of colours and the rapid curing times make it the perfect solution for domestic and time sensitive applications.
Not only can DeckProof be used as a waterproofing membrane, it has also been formulated into a pre-mixed anti-skid membrane. This opens up further opportunities for use on balconies, terraces and roof safety walkways. We can match any RAL colour code to produce the desired finish your clients require.
Car Parks and Industrial
Stairways, Ramps and Walkways
The hard wearing chemically resistant formulation of our anti-skid membrane makes it suitable for use in industrial warehouses and factories where heavy traffiking is common. With a curing time of 20 minutes and a traffic time of 1 hour, DeckProof ensures minimal disruption to factory operations. In addition to this we have specially formulated scattered aggregate systems for use on car park decks and ramps if required.
Access ramps, fire exit stairs and retail units are just a few of the projects DeckProof has been applied to. Our high visibility anti-skid safety system for stair treads, exit routes and other trafficked surfaces is ideal for such applications. The combination of colour matching and quick curing has given retail units, housing associations and local authorities the option to use DeckProof on many projects – from building entries and ramps, to stairways and man hole covers.
Technical Data Sheet & MSDS, click links below:
For more data sheets or installation guide please contact us +44 8443 356 386.
Surface temperature range (application): -300C* to +400C
Temperature range during service: -400C to +600C
Membrane thickness : 2mm Typical application
Tensile Strength: 20N/mm
Adhesion to concrete: 3.5MPa (concrete failure)
Time until waterproof: 20 Minutes
Ready for foot traffic: 1 Hour
Ready for vehicular traffic: 2 Hours
* With use of low temperature primer