“EcoProof’s Instant Set Waterproofing System is a seamless spray applied membrane, that is rapidly applied and is immediately shower proof.”

STATE OF THE ART LIQUID SYSTEM

An improvement on roofing felt, asphalt, Bitumen and other liquid coatings! The EcoProof system requires No Flames, Solvents or Primers and has no joints and has excellent Eco-Friendly credentials.

ECOPROOF INSTANT SET BENEFITS

Instant Set is special formulated to provide over 1200% elasticity and 100% memory. It fully bonds on contact with the surface and sets as a seamless membrane. This makes it the ideal solution for refurbishment projects and asbestos encapsulation alike.

CONTACT OUR TEAM FOR MORE INFORMATION ON +44 (0)8443 356 386 

PRODUCT FEATURES

WATERPROOFING

EcoProof provides a fully waterproof membrane.

ENCAPSULATING

Our unique spray application allows a fully encapsulated roof application.

SEAMLESS

Unlike other encapsulation systems, Instant Set provides a fully seamless finish.

RAPID APPLIED

Due to our bespoke spray system, Instant Set can be applied up to 500sq/m per day.

LOW DISRUPTION

Our low pressure spray does not disturb the surface, meaning operations below can carry on as usual.

FULLY BONDED

Our unique formulation provides outstanding levels of adhesion on many different types of surface.

Pitched and Corrugated Roofs

Flat Roofs

EcoProof-Asbestos-Waterproofing

EcoProof is suitable for use over many pitched and corrugated roofs. Our spray applied system is ideal for encapsulating asbestos and eliminates the high costs of removal and the associated dangers. There is little or no disruption to the operations in buildings below due to our low pressure spray system which can be applied at a rate of up to 800sq/m per day.

EcoProof-flat-roof-Waterproofing

Felt, single-ply, timber, concrete and asphalt are just a few of the flat roofing systems and materials that EcoProof can be applied to.  Due to the highly adhesive properties of our membrane, EcoProof can be bonded to almost any clean surface using either our spray applied system applied by one of our Approved Contractors, or using the brush and roller grade system depending on size and suitability.

Structural Waterproofing

Metal Roofs

EcoProof-Structural-Waterproofing

Our unique formulation provides a membrane suitable for use in tanking or underground projects. EcoProof spray applied membrane instantly cures on contact with the surface and provides a seamless, fully bonded finish. EcoProof contains no VOCs and requires no torches or flames to  apply, making it the choice of many green roof and renewable energy companies.

EcoProof-Metal-Roof-Coating2

Ecoproof Instant Set is ideal for encapsaulting metal and plastisol coated roofs. Its higly adhesive nature and its rust inhibiting properties provide a rapidly applied rubber roofing membrane. Also availbe as a standalone cut edge treatment where required.

TECHNICAL DATA

Elongation:  >1000%
Recovery ASTM D 412:  >95%
Surface temperature range (application):  +50C to +500C
Membrane thickness :  2mm Typical application
Tensile strength ASTM D 412, MPa (psi):  >830 (>120)
Accelerated weathering:  No deterioration of the film

ASTM G 155, 250 hrs:  >90% retention of original tensile strength
Puncture resistance CGSB 37-GP-56:  Passed (no punctures)
Fire ratings: AB
Time until waterproof: 1 hour
Insurance backed guarantees available

 

For more data sheets or installation guide please contact us +44 8443 356 386.

Instant Set Technical Data Sheet

 http://ecoproof.co.uk/wp-content/uploads/2017/07/INSTANT-SET-TECH-DATA.pdf

For more data sheets or installation guide please contact us +44 8443 356 386.