WHAT TO DO IF IT RAINS? It is advised to always check the weather forecast in advance but for circumstances where rain is an immediate problem, stop application immediately. Any product applied on a wet surface risks not bonding correctly. If within the 20-minute curing window, cover up your existing work and wait for a good dry spell to continue. Thoroughly dry coat between applications. It is advised to always check the weather forecast in advance but for circumstances where rain is an immediate problem.
HOW CLEAN DO THE SURFACES HAVE TO BE? If there is any dust or dirt on the surface our products will bond to this. Ensure the surface is clean by using a high pressure jet wash or similar cleaning method. Ultimately, each project is unique, and it’s down to the applicator to decide the best method of cleaning for that specific surface.
CAN I SLOW DOWN THE CURING PROCESS? Using less or more catalyst can affect curing time, but it may also cause an uneven and incomplete curing of the membrane. We advise to always stick to the prescribed catalyst to product ratio.
WHAT CAN I CLEAN MY BRUSHES OR ROLLER IN? We strongly advise disposing of brushes and rollers after each use, this avoids any contamination occurring in the membrane and ensures a uniform finish. Due to this we advise using cheap brushes and short pile rollers.
HANDLING Keep containers upright and tightly closed when not in use and keep from freezing.
SHELF LIFE Our products have a shelf life of 12 months when stored in original unopened containers.
WHERE CAN I GET FURTHER INFORMATION other information on any of our products and systems please contact our technical team on 02038 870 353 or email [email protected]